Position and Size

Specifies the size and the position of the selected image, frame, or OLE object on a page.

āĻāχ āύāĻŋāĻ°ā§āĻĻ⧇āĻļāĻžāĻŦāϞ⧀āϤ⧇ āϏāĻ¨ā§āύāĻŋāĻŦ⧇āĻļ āĻ•āϰāϤ⧇...

Choose Format - Image - Properties - Position and Size tab.

Choose Format - Frame and Object - Properties - Position and Size tab.

Choose View - Styles - Frame Styles - open context menu Modify/New - Type tab.

Choose Insert - Frame - Frame - Position and Size tab.


āφāĻ•āĻžāϰ

āĻĒā§āϰāĻ¸ā§āĻĨ

Enter the width that you want for the selected object.

āϏāĻŽā§āĻĒāĻ°ā§āĻ•āĻŋāϤ

āĻĒāĻžāĻ ā§āϝ āĻĒ⧃āĻˇā§āĻ āĻžāϰ āĻĒā§āϰāĻ¸ā§āĻĨ⧇āϰ āĻļāϤāĻ•āϰāĻž āĻšāĻŋāϏ⧇āĻŦ⧇ āύāĻŋāĻ°ā§āĻŦāĻžāϚāĻŋāϤ āĻŦāĻ¸ā§āϤ⧁āϰ āĻĒā§āϰāĻ¸ā§āĻĨ āĻ—āĻŖāύāĻž āĻ•āϰāĻž āĻšā§ŸāĨ¤

Relative width relation

Decides what 100% width means: either text area (excluding margins) or the entire page (including margins).

āωāĻšā§āϚāϤāĻž

Enter the height that you want for the selected object.

āϏāĻŽā§āĻĒāĻ°ā§āĻ•āĻŋāϤ

āĻĒ⧃āĻˇā§āĻ āĻž āĻĒāĻžāĻ ā§āϝ āĻāϞāĻžāĻ•āĻžāϰ āĻļāϤāĻ•āϰāĻž āĻšāĻŋāϏ⧇āĻŦ⧇ āύāĻŋāĻ°ā§āĻŦāĻžāϚāĻŋāϤ āĻŦāĻ¸ā§āϤ⧁āϰ āωāĻšā§āϚāϤāĻž āĻ—āĻŖāύāĻž āĻ•āϰāĻž āĻšā§ŸāĨ¤

Relative height relation

Decides what 100% height means: either text area (excluding margins) or the entire page (including margins).

āĻ…āύ⧁āĻĒāĻžāϤ āϰāĻžāϖ⧁āύ

Maintains the height and width ratio when you change the width or the height setting.

āĻĒā§āϰāĻ•ā§ƒāϤ āφāĻ•āĻžāϰ

āĻĒā§āϰāĻ•ā§ƒāϤ āĻŽāĻžāύ⧇ āύāĻŋāĻ°ā§āĻŦāĻžāϚāĻŋāϤ āĻŽāĻžāύ⧇āϰ āφāĻ•āĻžāϰ āϏ⧇āϟāĻŋāĻ‚ āĻĒ⧁āύāσāύāĻŋāĻ°ā§āϧāĻžāϰāĻŖ āĻ•āϰ⧁āύāĨ¤

note

āĻāχ āĻ…āĻĒāĻļāύāϟāĻŋ āĻĢā§āϰ⧇āĻŽā§‡āϰ āϜāĻ¨ā§āϝ āύāϝāĻŧāĨ¤


āĻ¸ā§āĻŦāϝāĻŧāĻ‚āĻ•ā§āϰāĻŋāϝāĻŧ

āĻĢā§āϰ⧇āĻŽā§‡āϰ āĻŦāĻŋāώāϝāĻŦāĻ¸ā§āϤ⧁āϰ āϏāĻžāĻĨ⧇ āĻŽāĻŋāϞāĻžāύ⧋āϰ āϜāĻ¨ā§āϝ āĻ¸ā§āĻŦāϝāĻŧāĻ‚āĻ•ā§āϰāĻŋāϝāĻ­āĻžāĻŦ⧇ āĻĢā§āϰ⧇āĻŽā§‡āϰ āĻĒā§āϰāĻ¸ā§āĻĨ āĻ…āĻĨāĻŦāĻž āωāĻšā§āϚāϤāĻž āϏāĻŽāĻ¨ā§āĻŦāϝāĻŧ āĻ•āϰ⧁āύāĨ¤ āϝāĻĻāĻŋ āφāĻĒāύāĻŋ āϚāĻžāύ, āφāĻĒāύāĻŋ āĻĢā§āϰ⧇āĻŽā§‡āϰ āϜāĻ¨ā§āϝ āϏāĻ°ā§āĻŦāύāĻŋāĻŽā§āύ āĻĒā§āϰāĻ¸ā§āĻĨ āĻ…āĻĨāĻŦāĻž āϏāĻ°ā§āĻŦāύāĻŋāĻŽā§āύ āωāĻšā§āϚāϤāĻž āϏ⧁āύāĻŋāĻ°ā§āĻĻāĻŋāĻˇā§āϟ āĻ­āĻžāĻŦ⧇ āωāĻ˛ā§āϞ⧇āĻ– āĻ•āϰāϤ⧇ āĻĒāĻžāϰāĻŦ⧇āύāĨ¤

āύ⧋āϟ āφāχāĻ•āύ

āϝāĻ–āύ āφāĻĒāύāĻŋ āĻāĻ•āϟāĻŋ āĻĢā§āϰ⧇āĻŽ āύāĻŋāĻ°ā§āĻŦāĻžāϚāύ āĻ•āϰāĻŦ⧇āύ āĻļ⧁āϧ⧁āĻŽāĻžāĻ¤ā§āϰ āϤāĻ–āύ āĻ¸ā§āĻŦāϝāĻŧāĻ‚āĻ•ā§āϰāĻŋāϝāĻŧ āĻ…āĻĒāĻļāύ āĻŦāĻŋāĻĻā§āϝāĻŽāĻžāύ āĻšāĻŦ⧇āĨ¤


āύ⧋āĻ™ā§āĻ—āϰ

Specify the anchoring options for the selected object or frame. The anchor options are not available when you open the dialog from the Styles window.

āĻĒ⧃āĻˇā§āĻ āĻžāϝāĻŧ

Anchors the selection to the current page.

āĻ…āύ⧁āĻšā§āϛ⧇āĻĻ⧇

Anchors the selection to the current paragraph.

āĻ…āĻ•ā§āώāϰ⧇

Anchors the selection to a character.

āĻ…āĻ•ā§āώāϰ⧇

Anchors the selection as character. The height of the current line is resized to match the height of the selection.

āĻ…āĻŦāĻ¸ā§āĻĨāĻžāύ

āĻŦāĻ°ā§āϤāĻŽāĻžāύ āĻĒ⧃āĻˇā§āĻ āĻžāϝāĻŧ āύāĻŋāĻ°ā§āĻŦāĻžāϚāĻŋāϤ āĻŦāĻ¸ā§āϤ⧁āϰ āĻ…āĻŦāĻ¸ā§āĻĨāĻžāύ āϏ⧁āύāĻŋāĻ°ā§āĻĻāĻŋāĻˇā§āϟ āĻ­āĻžāĻŦ⧇ āωāĻ˛ā§āϞ⧇āĻ– āĻ•āϰ⧁āύāĨ¤

āĻ…āύ⧁āĻ­ā§‚āĻŽāĻŋāĻ•

Select the horizontal alignment option for the object. This option is not available if you chose "anchor as character".

āĻāϰ āĻĻā§āĻŦāĻžāϰāĻž

Enter the amount of space to leave between the left edge of the selected object and the reference point that you select in the To box. This option is only available if you select "From Left" in the Horizontal box.

āĻĒā§āϰāϤāĻŋ

Select the reference point for the selected horizontal alignment option. The following options are available:

Beware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

tip

You can see the result of the alignments options that you select in the Preview box.


āĻœā§‹ā§œ āĻĒ⧃āĻˇā§āĻ āĻžā§Ÿ āĻŽāĻŋāϰāϰ

Reverses the current horizontal alignment settings on even pages.

tip

You can also use the Image flip options to adjust the layout of objects on even and odd pages.


āωāĻ˛ā§āϞāĻŽā§āĻŦ

Select the vertical alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list.

tip

You can see the result of the alignments options that you select in the Preview box.


āĻāϰ āĻĻā§āĻŦāĻžāϰāĻž

Enter the amount of space to leave from the top edge of the object to the region or reference line selected in the to dropdown list. This option is active only when the following combinations of Vertical and Anchor are selected. For these combinations, you can specify the amount of space to leave from:

Vertical

with Anchor

From top

Top edge of selected region.
Positive values move the object down, negative values up.

To page, To paragraph, To character or To frame

From bottom

Selected reference line.
Positive values move the object up, negative values down.

To character or As character


āĻĒā§āϰāϤāĻŋ

Select the region or reference line for the vertical alignment. The object can be positioned in relation to the following regions or reference lines:

Beware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

note

āϝāĻĻāĻŋ āφāĻĒāύāĻŋ āĻāĻ•āϟāĻŋ āĻ¸ā§āĻĨāĻŋāϰ āωāĻšā§āϚāϤāĻžāϏāĻš āĻāĻ•āϟāĻŋ āĻĢā§āϰ⧇āĻŽā§‡āϰ āύ⧋āĻ™ā§āĻ—āϰ āĻ•āϰ⧇āύ, āĻļ⧁āϧ⧁āĻŽāĻžāĻ¤ā§āϰ "āĻŦā§‹āϤāĻžāĻŽ" āĻāĻŦāĻ‚ "āϕ⧇āĻ¨ā§āĻĻā§āϰ⧇āϰ" āĻĒā§āϰāĻžāĻ¨ā§āϤāĻŋāĻ•āĻ•āϰāĻŖ āĻĒāĻ›āĻ¨ā§āĻĻ āĻŦāĻŋāĻĻā§āϝāĻŽāĻžāύāĨ¤


Keep inside text boundaries

Keeps the selected object within the layout boundaries of the text that the object is anchored to. To place the selected object anywhere in your document, do not select this option.

By default, the Keep inside text boundaries option is selected when you open a document that was created in a version of Writer older than OpenOffice.org 2.0. However, this option is not selected when you create a document or when you open a document in Microsoft Word format (*.doc).

āĻĒā§āϰāĻžāĻ•āĻĻāĻ°ā§āĻļāύ āĻ•ā§āώ⧇āĻ¤ā§āϰ

Displays a preview of the current selection.

āϏāĻŦ⧁āϜ āφāϝāĻŧāϤāĻ•ā§āώ⧇āĻ¤ā§āϰ āύāĻŋāĻ°ā§āĻŦāĻžāϚāĻŋāϤ āĻŦāĻ¸ā§āϤ⧁ āĻĒā§āϰāϤāĻŋāύāĻŋāϧāĻŋāĻ¤ā§āĻŦ āĻ•āϰ⧇ āĻāĻŦāĻ‚ āϞāĻžāϞ āφāϝāϤāĻ•ā§āώ⧇āĻ¤ā§āϰ āĻĒā§āϰāĻžāĻ¨ā§āϤāĻŋāĻ•āĻ•āϰāĻŖ āϰ⧇āĻĢāĻžāϰ⧇āĻ¨ā§āϏ āĻŦāĻŋāĻ¨ā§āĻĻ⧁ āĻĒā§āϰāϤāĻŋāύāĻŋāϧāĻŋāĻ¤ā§āĻŦ āĻ•āϰ⧇āĨ¤ āϝāĻĻāĻŋ āφāĻĒāύāĻŋ āĻ…āĻœā§‡āĻ•ā§āϟāϟāĻŋ āĻ…āĻ•ā§āώāϰ āĻšāĻŋāϏ⧇āĻŦ⧇ āύ⧋āĻ™ā§āĻ—āϰ āĻ•āϰ⧇āύ, āϰ⧇āĻĢāĻžāϰ⧇āĻ¨ā§āϏ āφāϝāĻŧāϤāĻ•ā§āώ⧇āĻ¤ā§āϰ āĻāĻ•āϟāĻŋ āϞāĻžāϞ āϰ⧇āĻ–āĻžāϝāĻŧ āĻĒāϰāĻŋāĻŦāĻ°ā§āϤ⧀āϤ āĻšāĻŦ⧇āĨ¤

āĻŦāĻŋāĻ¨ā§āϝāĻžāϏ - āύ⧋āĻ™ā§āĻ—āϰ

Format - Align Text